Industrial strength two-part epoxy adhesive designed to produce a super bond. Ideal for repairs in the workshop, automobile, garage, industry and household. Excellent adhesion to repair steel, copper, aluminum and most metals, woods and ceramics. A Dynatex Exclusive Product!

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49407	Single Shot Epod 3 Pack - Carded	24
49409A	1 oz. (30ml) Bulk	12

Can replace or be used as a dressing for conventional gaskets. Will not shrink due to solvent evaporation. Eliminates the need to retorque compressible mechanical gaskets. Can be used on vacuum pump flanges, fuel pumps, water pumps, gearbox covers, automotive and truck axle covers. Once cured, has an operating temperature range of -65°F to 300°F

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49477	Red 50ml Tube	10

Prevents carbon fusion and seizure up to 2000°F(1093°C). Protects against corrosion between dissimilar metals. Resists water, salt solution, most shop and automotive fluids. Reduces coefficient of friction by a minimum of 20%.
76732 Loctite ® Functional Equivalent - Part # 49558, 49560, 49576

51147 Loctite ® Functional Equivalent - Part # 49582

77124 Loctite ® Functional Equivalent - Part # 49584-->

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49501	1 oz. (28g) Tube Carded	12
49550	4 oz. (114g) Brush Top Bottle	24
49558	8 oz. (227g) Brush Top Bottle	12
49560	16 oz. (454g) Brush Top Bottle	12
49576	16 oz. Aerosol Can 12 oz. (340g) Net Wt.	12
49580	42 lb. Pail (5-Gallon)	1
49582	Copper 8 oz. Brush Top Bottle Contains copper	12
49584	Nickel 8 oz. Brush Top Bottle Contains no copper	12

Automotive sealant for exterior and interior joints and seams. Smoothes easily, paintable with any type of paint within 60 minutes. Ample time for tooling, solvent not required for smoothing. Will not crack, minimal shrinkage

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49388	11 oz. (312g) Cartridge	12

Works instantly to neutralize, dissolve and remove power robbing corrosion from battery terminals, cable hold downs and boxes. New acid detector formula assures a clean battery (foaming yellow cleaner turns pink upon contact with battery acid). Increases battery life. Use in conjunction with Dynatex Battery Terminal Protector (P/N 49678).

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49675	16 oz. Aerosol Can 15 oz. Net Wt.	12

Surfaces should be cleaned with Dynatex Battery Cleaner (P/N 49675) and allowed to dry, before applying preventive spray. Dynatex Battery Terminal Protector inhibits corrosion for the life of all batteries. Use on battery cable terminals and battery post to prevent interruption of current battery flow.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49678	16 oz. Aerosol Can 11 oz. Net Wt.	12

Stops squeal and protects against belt slippage due to heat, cold, dampness, dust and glazing. Extends belt life by conditioning against drying and cracking. Helps prevent premature wear. Provides better grip and traction. Can be used on fan belts, power steering belts, water pumps and power tools.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
52188	16 oz. Aerosol Can 12 oz. Net Wt	12

Dynatex® Rubber Toughened Adhesive is a black medium - high viscosity, rubber-toughened ethyl cyanoacrylate adhesive. Provides superior shock and thermal resistance when bonding rubbers, metals, and plastics in harsh environments

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
42241	1 Oz. Bottle	20
42241-05	1 Oz. Bottle	20
42241-10	1 Oz. Bottle	20

Dynatex® General Purpose Adhesive is a single component high viscosity cyanoacrylate adhesive with a quicker setting speed than most high viscosity materials. Suitable for all general-purpose bonding.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
42220	1 Oz. Bottle	20

Dynatex® General Purpose Gel Adhesive is a single component high viscosity gel cyanoacrylate adhesive with a faster cure time than our standard gel. Ideal for bonding porous materials or when controlling adhesive flow is critical. Offers maximum gap filling and repositioning time.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
42999B	1 Oz. Bottle	20

Formulated for gasket making applications. Sensor safe and manufactured to meet OEM specifications. Makes instant, leak proof gaskets for all engines, drive train equipment and related components. Temperature resistant up to 500°F (260°C). Resist oil, water, anti-freeze and transmission fluid. Cures tough and flexible. Works on all vehicles.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49200	3 oz. (85g) Tube Carded	12
49271	8 oz. (227g) Automatic Can	12
49290	11 oz. (312g) Cartridge	12

Dynatex Threadlocker Gel Pump outperforms leading gel and stick products in the marketplace! Stays where it is applied and will not run. Easy cleanup. Just wipe Nozzle with clean rag and close cap.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49446	35 ml Pump	6

Replaces most cut gaskets. Sensor safe and manufactured to meet OEM specifications. Resist cracking, shrinking and migration caused by thermal expansion. Cures tough and flexible. Temperature resistant up to 500°F (260°C). Resist oil, water, anti-freeze and transmission fluid. For valve covers, oil pans, transmission pans, rear-end housings, timing chain covers, thermostat housings, water pumps and oil pump flanges.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49203	3 oz. (85g) Tube Carded	12
49276	8 oz. (227g) Automatic Can	12
49293	11 oz. (312g) Cartridge	12

Fills gaps up to .006 inches. Apply prior to assembly. Eliminates need for stocking lock nuts and lock washers. Can be removed without special tools.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49441	6ml Tube-Carded	6
49442	24 ml Bottle-Carded	6
49444	250ml Bottle	4
49440	10ml Bottle	20
49443	50ml Bottle	10

Locks and seals metal threads after assembly and adjustments are complete. Fills gaps up to .005 inches. Migrates into pre-assembled threaded parts. Secures adjustments and set screws.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49461	6ml Tube-Carded	6
49462	24 ml Bottle-Carded	6
49460	10ml Bottle	20
49463	50ml Bottle	10

Use in applications where the fast cure of an anaerobic is required. Passive metals and some plated surfaces require priming to trigger cure reaction. Recommended for very dirty or oily surfaces and for use in cold temperatures.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49674	6 oz. Aerosol Can 5.5 oz. Net Wt	6

Locks and seals metal threaded assemblies where high strength is required. Fills gaps up to .008 inches. Apply prior to assembly. Protects against thread corrosion.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
9440	1 ml Tube	100
49451	6ml Tube-Carded	6
49452	24 ml Bottle-Carded	6
49454	250ml Bottle	4
49450	10ml Bottle	20
49453	50ml Bottle	10

Designed to tolerate extremely high temperatures of brake systems. Contains petroleum and is used on metal contact points. Temperature range -55°F to 1600°F. Prevents corrosion and rust, particularly on caliper slide bars.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49590	8 oz. Brush Top Bottle	12

Quickly removes grease, oil and brake dust from brake system components. Leaves no residue. Fast acting. Use on drums, rotors, master and wheel cylinders, shoes, and linings, pads, hardware, back plates, linkages and calipers. Safe for use on aluminum. Does not contain chlorinated solvents.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49665	20 oz. Aerosol Can 14 oz. Net Wt.	12
49669	1-Gallon - 3.8L	4
49670	5-Gallon - 19L	1
49671	55-Gallon	1

Contains no petroleum or by-products and will not attack rubber. An excellent release agent and lubricant for rubber and plastic parts, such as o-rings, valves and plastic gears. Locks out moisture and has excellent wash-away resistance. Unaffected by extreme temperatures from -40°F to 500°F. Extends brake system life and stops disc brake squeal. Prevents drying and cracking. Recommended by major brake installer chains, fleets and brake manufacturers.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
1020	6g Pillow Packet	12
49578	6.0 oz. net Automatic Can	24
49593	5.3 oz. Tube-Boxed	12

Forms a tough, flexible coating that seals out moisture and corrosion. Adheres to metal, rubber, vinyl and plastic. Dries at room temperature in 5 minutes.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49412	Black - 4 oz. Brush Top Can	12

Helps remove varnish, gum, sludge and other deposits in minutes. Improves performance. Use on carburetors, automatic chokes, PCV systems and heat risers. VOC-Compliant. Contains no CFCs. Oxygen sensor safe.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
52105	16 oz. Aerosol Can 12 oz. Net Wt.	12

Dynatex® Fast Setting Gel Adhesive is a single component high viscosity gel cyanoacrylate adhesive with a faster cure time than our standard gel. Ideal for bonding porous materials or when controlling adhesive flow is critical. Offers maximum gap filling and repositioning time.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
42996	1 Oz. Bottle	20

Dynatex® Fast Setting Rubber Bonder is a single component medium viscosity cyanoacrylate adhesive. Fast setting and ideal for rubber and plastic bonding applications.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
42028	1 Oz. Bottle	20

Dynatex® Fast Setting Rubber Bonder is a single component low viscosity Cyanoacrylate adhesive. It is a fast setting adhesive specifically formulated for bonding rubber.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
42006	1 Oz. Bottle	20

Dynatex® Rubber Toughened Adhesive is a medium to high viscosity, rubber-toughened ethyl cyanoacrylate adhesive. Provides superior shock and thermal resistance when bonding rubbers, metals, and plastics in harsh environments.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
42240	1 Oz. Bottle	20
42240-05	1 Oz. Bottle	20
42240-10	1 Oz. Bottle	20

Dynatex® General Purpose Adhesive is a single component high viscosity cyanoacrylate adhesive designed for general-purpose use. Offers excellent gap filling characteristics and extended repositioning time.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
42300	1 Oz. Bottle	20

Dynatex® General Purpose Adhesive is a single component high viscosity cyanoacrylate adhesive designed for general-purpose use. Offers excellent gap filling characteristics and extended repositioning time.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
42500	1 Oz. Bottle	20

Dynatex® General Purpose Adhesive is a single component medium viscosity cyanoacrylate adhesive. Suitable for general-purpose applications on metals, rubbers and plastics. Also excellent on porous substrates such as foam rubber, cloth and wood.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
42050	1 Oz. Bottle	20

Dynatex® General Purpose Adhesive is a single component low to medium viscosity Cyanoacrylate adhesive. Suitable for general-purpose applications on metals, rubbers and plastics.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
42025	1 Oz. Bottle	20

Dynatex® General Purpose Adhesive is a single component high viscosity cyanoacrylate adhesive with a quicker setting speed than most high viscosity materials. Suitable for all general-purpose bonding.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
42150	1 Oz Bottle	20

Dynatex® General Purpose Adhesive is a single component low viscosity cyanoacrylate adhesive. Suitable for general-purpose applications on metals, rubbers and plastics.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
42003	1 Oz. Bottle	20

Dynatex® General Purpose Adhesive is a single component low viscosity Cyanoacrylate adhesive. It is a fast setting adhesive ideal for bonding all types rubbers and preassembled parts.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
42004	1 Oz. Bottle	20

Dynatex® General Purpose Adhesive is a single component, medium to high viscosity Cyanoacrylate adhesive. Designed for general purpose bonding on all types of substrates where gap filling is required.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
4005Z	1 Oz. Bottle	20

Dynatex® General Purpose Wicking Grade Adhesive is a single component low viscosity Cyanoacrylate adhesive. It is a fast setting wicking grade adhesive ideal for bonding preassembled parts. Excellent for bonding inactive plastic substrates.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
42002	1 Oz. Bottle	20

Dynatex® General Purpose Gel Adhesive is a single component high viscosity gel cyanoacrylate adhesive with a faster cure time than our standard gel. Ideal for bonding porous materials or when controlling adhesive flow is critical. Offers maximum gap filling and repositioning time.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
42999	1 Oz. Bottle	20

Dynatex® Clear Metal Adhesive is a single component, low viscosity methyl Cyanoacrylate adhesive. Formulated for metal, ceramic, and ferrite bonding. Offers superior solvent and chemical resistance.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
405-1	1 Lb. Bottle	4

Dynatex® Clear Metal Bonder is a single component, low viscosity methyl cyanoacrylate adhesive. Formulated for metal, ceramic, and ferrite bonding. Offers superior solvent and chemical resistance.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
45100	1 Oz. Bottle	20

Dynatex® Non Bloom/Low Odor Adhesive is a single component high viscosity cyanoacrylate adhesive. No-odor and non-blooming characteristics make this product user friendly when vapor control is an issue.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
55100	1 Oz. Bottle	20

Dynatex® Non Bloom/Low Odor Adhesive is a single component low viscosity cyanoacrylate adhesive. No-odor and non-blooming characteristics make this product user friendly when vapor control is an issue.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
45005	1 Oz. Bottle	20

Dynatex® Non Bloom/Low Odor Adhesive is a single component low to medium viscosity cyanoacrylate adhesive. No-odor and non-blooming characteristics make this product user friendly when vapor control is an issue.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
45008	1 Oz. Bottle	20

Dynatex® Plastic Bonder is a single component low to medium viscosity Cyanoacrylate adhesive. Suitable for general-purpose applications on metals, rubbers and plastics.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
42010	1 Oz. Bottle	20

Provides transparent, watertight silicone rubber seal for a wide range of applications. Bonds and seals metal, plastics, glass, fabric, vinyl, wood and rubber. Use on widshields, sunroofs, tail lights, interior panels,fire walls and dashboards. Cures at room temperature.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49204	3 oz. (85g) Tube Carded	12
49274	8 oz. (227g) Automatic Can	12
49294	11 oz. (312g) Cartridge	12

Dynatex® Clear Rubber Bonder is a single component, low to medium viscosity Cyanoacrylate adhesive. Ideal for rubber bonding and filling small gaps.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
40030	1 Oz. Bottle	20

Dynatex® Clear Rubber Bonder is a single component, medium viscosity cyanoacrylate adhesive. Suitable for general-purpose bonding but provides excellent strength and speed on all rubber compounds

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
45500	1 Oz. Bottle	20

Dynatex® Clear Structural Adhesive is a medium viscosity, fast curing adhesive for bonding metals, magnets or ferrites, ceramics, and glass. Dynatex® Clear Structural Adhesive can be heat-cured at temperatures of 2000F in less than ½ hour to total cure, fixtures in minutes with heated parts. Fixture speeds can be greatly increased with the use of Dynatex® Clear Structural Adhesive Activator. Dynatex® Structural Adhesive Activator is a highly reactive surface activator designed to speed cure rates of acrylic adhesives and specially designed Dynatex® Structural Adhesive Activator. Dynatex® Structural Adhesive Activator can also be used as a cleaner for substrate preparation.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
52401	1 Liter Adhesive / 1 Qt. Activator	1
52402	2 Oz. Adhesive Bottle / 15ml Actvator	1

Dynatex® Clear Surface Insensitive Adhesive is a single component, low viscosity Cyanoacrylate adhesive. It is an extremely fast setting wicking grade adhesive ideal for bonding pre-assembled parts, wood and other products with varying acidity levels. It is particularly designed to set and adhere rapidly to inactive surfaces.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
420H1	1 Oz. Bottle	20
420H2	1 Oz. Bottle	20
420H3	1 Oz. Bottle	20
420H4	1 Oz. Bottle	20

Dynatex® Ultra Fast Wicking Grade Adhesive is a single component low viscosity Cyanoacrylate adhesive. It is a fast setting wicking grade adhesive ideal for bonding preassembled part

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
42000	1 Oz. Bottle	20

Dynatex® Ultra Fast Setting Rubber Bonder is a single component low viscosity Cyanoacrylate adhesive. Extremely fast setting and specifically formulated for all types of rubber bonding applications.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
42008	1 Oz. Bottle	20

Dynatex® Wicking Grade Adhesive is a single component low viscosity Cyanoacrylate adhesive. It is a fast setting wicking grade adhesive ideal for bonding preassembled parts and other general-purpose bonding

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
42001	1 Oz. Bottle	20

Removes grease, dirt, oil, and other surface contaminants from electrical/electronic devices. Fast drying, leaves no residue, and cleans easily. Safe on most surfaces. Extremely Flammable.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
52146	16 oz. Aerosol Can 12 oz. Net Wt.	12

Dynatex® Cyanoacrylate Accelerator speeds the curing of Dynatex® Cyanoacrylates where low humidity levels or surface acidity may exist. This is also used for fillet conditions or when gap filling between substrates. Dynatex® Cyanoacrylate Accelerator can be pre-applied to the opposite surface from the adhesive or post applied to the adhesive joint.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
40002	2 Oz. Bottle	20

Dynatex® Cyanoacrylate Remover quickly softens and dissolves cured and uncured adhesive from unwanted areas. Dynatex® Cyanoacrylate Remover is an essential product for industrial manufacturing production involving the use of cyanoacrylates.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
46020	2 Fl. Oz. Bottle	20

Prevents boot tears, corrosion, arcing and the fusing of spark wires to spark plugs. Maintains its consistency in extreme temperatures from -40°F to 400°F. Resists moisture, acids and alkalines. Moisture proof seal for automotive, marine and other ignition and electrical systems. For distributor caps, battery cables, posts and terminals, light bulb sockets, trailer hitch and all other types of electrical connectors. Complies with FDA Regulation 21 CFR178.3570.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
1046	2 Gram Pillow Packet	3000
49634	1/3 oz. (8.5g) Tube Carded	12
49635	5 oz. (142g) Tube Boxed	12

Dampens vibration at caliper/brake pad interface to eliminate brake squeal. Resists diesel fuel, ethylene glycol, water, grease and brake fluid.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49661	4 FL. oz. (118ml) Squeeze Bottle	12
49662	12 oz. Aerosol Can 9 oz. Net Wt.	12

Excellect oil resistance, guaranteed not to leak. Leak proof in the presence of oil, water and anti-freeze. Sensor safe and manufactured to meet OEM specifications. Makes instant gaskets for all engines. Temperature resistant up to 625°F (329°C). Use on valve covers, oil pans, transmission pans, timing covers and intake manifold end seals.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
47200	3.8 oz. (108g) Tube Carded	12
47201	8 oz. (227g) Automatic Can	12

Sensor safe, low ordor, non-corrosive sealant manufactured to meet OEM specifications. Will not leak and remains flexible. Resists oil, water, anti-freeze, grease and transmission fluid. Temperature resistant up to 500°F (260°C). Use to replace gaskets on valve covers, oil pans, transmission pans, rear-end housings, water pumps and timing chain covers.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
47203	3.8 oz. (108g) Tube Carded	12

Advanced formula instant gasketing material designed for late model vehicles with elevated operating temperatures. Low odor, sensor safe; non-corrosive and manufactured to exceed OEM specifications. Highly flexible and will not leak. Temperature resistant up to 700°F (371°C). Use on valve covers, transmission pans, exhaust manifolds/headers, oil pans, thermostat housing and water pumps.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
47101	3.8 oz. (108g) Tube Carded	12

Formulated for import cars. Use to replace most gaskets. High temperature, sensor safe, low odor and non-corrosive. Resists water, oil and anti-freeze. Will not leak. Temperature resistant up to 625°F (329°C). Use on valve covers, oil pans, water pumps, transmission pans, thermostat housings, timing covers and intake manifold end seals.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
47181	3.8 oz. (108g) Tube Carded	12
47182	8 oz. (227g) Automatic Can	12

Quickly dissolves and flushes away grease, oil, dirt and other contaminants while leaving no residue. Dismantling is eliminated on most equipment. Use on air conditioning equipment, electric motors, alternators, starting motors, cables, controls, regulators, relays, signals, solenoids, electrical contact points, connections, air compressors, battery chargers and more. Not safe for use on rubber or plastic parts.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
52145	16 oz. Aerosol Can 16 oz. Net Wt.	12

Quickly removes grease, oil, dirt and other contaminants. Works on steel, aluminum, copper and other metals. Safe for use on rubber and plastic. Can also be used on driveways and garage floors.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
52165	20 oz. Aerosol Can 16 oz. Net Wt.	12

Seals small holes in gas tanks in just five minutes. Eliminates hazardous welding and need to remove tank. Sticks to "gasoline wet" metal. Works up to 225°F(107°C). Easy to use. Pre-measured to assure consistent results.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49410	1.75 oz. (50g) Carded	12

Quickly removes baked-on gaskets, silicone, weatherstrip adhesive, carbon deposits, dried oil, adhesives, grease and paint. Removes gaskets in 10-12 minutes. Prepares metal parts for new gasket installation.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49673	16 oz. Aerosol Can 13 oz. Net Wt.	12

Non-streaking formula cuts through stubborn dirt and film without smudging. Removes tar, road film, insects, salt, grease and paint overspray from glass. Also can be used on mirrors, chrome, porcelain, stainless steel and other hard surfaces. Contains no CFCs.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
52185	20 oz. Aerosol Can 19 oz. Net Wt.	12

Dynatex® Green High Strength Pneumatic/Hydraulic Sealant is a single component anaerobic retaining and locking adhesive, which develops high strength. The product cures between close fitting metal parts where there is an absence of air.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
46450	10 ml Bottle	20
46453	50ml Bottle	10
46454	250ml Bottle	4

Dynatex GTX MuliSeal Adhesive Sealant is a new VOC compliant adhesive sealant that will take the place of traditional polyurethane. The fast curing GTX provides permanent elastic adhesion to a number of surfaces with excellent elasticity. The GTX will finally give the truck, trailer, RV, and container industry a safer, quality adhesive/sealant. Like polyurethane, the GTX is designed to resist all the, on-the-road flexing, adhesion/sealing wear and tear. GTX is paintable in 30 minutes, sandable, non-yellowing, non-streaking, and solvent-free with a 12-month shelf life.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49390	Black 10.0 FL Oz. Cartridge	12
49391	White 10.1 FL Oz. Cartridge	12
49392	Grey 10.1 FL Oz. Cartridge	12

Dynatex Hand Cleaner is a precisely formulated blend of surfactants, emulsifiers, and skin conditioners. Dynatex balanced mixture provides optimum cleaning potential for your hands without harshness or irritability. Removes grease, stains, paint, tars, printer’s ink, fish odors, etc. Dynatex All Purpose Hand Cleaner with lanolin is a creamy formula that liquefies and gently lifts grease, grime and stains from the hands safely with or without water. Dynatex All Purpose Hand Cleaner leaves hands cleaned and conditioned without the greasy feeling and strong odors of competitive brands. Dynatex All Purpose Hand Cleaner contains lanolin and skin care emollients to aid in healing rough, dry and overused hands.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
53108	15 fl. oz. Squeeze Bottle	12
53107	18 - 15 fl. oz. Squeeze Bottle w/ display rack	18

A grease-like silicone material, heavily filled with heat conductive metal oxides. Used as a heat transfer medium in electrical and electronic applications for facilitating heat dissipation. Withstands high and low temperatures (-65°F to 400°F), water resistant chemically inactive and hydrolytically stable. Has also been found useful on thermocouple and thermometer wells, mounting semi-conductor devices and thermal joints. NLGI No. 2.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49643	5 oz. (142g) Tube-Boxed	12
49644	32 oz. (908g) Tub	12
49647	60 lb. Pail	1

Versatile spray adhesive seals gaskets and holds them in place during assembly. Dries quickly. Temperature ranges -65°F to 450°F.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49358	12 oz. Aerosol Can 9 oz. Net Wt.	12

DYNATEX SUPER SCRUBS Clean paint, adhesive, oil and more from hands, tools and surfaces. PAINT-Oil and Water based. Effective up to 24 hours after application. To assist removal of dry paint, place wipe on spill for a few minutes to soften paint. ADHESIVES AND SEALANTS-Silicone, acrylic, fillers, poly adhesive, poly foam, epoxy, rubber cement and label residue. OIL BASED STAINS-Oil, grease, ink and more. GENERAL CLEANING-Ideal for stain and grease removal from most work surfaces. Will refresh and clean old paint and sealants.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
53104	80 - 8X12 wipes	8

Lubricant widely used for engine rebuilding. Protects engine from rust and corrosion during storage. Once engine is started, protects moving parts until engine-lubricating oil reaches them.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49598	6 oz. (170g) Squeeze Tube	12

Repairs holes and leaks in mufflers, tailpipes and around joints. Makes new installations more secure. Run engine at idle speed for 20 minutes to harden quickly or allow to sit overnight.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49411	4.5 oz. (128g) Carded	12

Prevents rust and corrosion by depositing an ultra thin film that coats and penetrates the surface pores of metal. Penetrates quickly to free rusted bolts, nuts and sliding parts. Displaces moisture to dry out damp electrical parts.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
52125	16 oz. Aerosol Can 12 oz. Net Wt	12

Anaerobic sealant chemically cures in the absence of air. Locks and seals threaded fittings. Lubricates and resists corrosion. Prevents leakage and loosening from vibration and moisture in hydraulic, pneumatic, steam and process piping. Allows final adjustment up to 24 hours after application. Instant sealing to 10,000 psi.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49485	6ml Tube-Carded	12
49486	50ml Tube	6

Repairs iron, steel, aluminum, brass, copper, plastic and fiberglass. Bonds, fills and seals cracked or chipped castings, weld seams and split stampings. Can be drilled, tapped, threaded, sanded, filed and painted. Will not shrink, rust or corrode. Water and oil proof. Unaffected by most acids and solvents. Combines strength of steel particles with bonding strength of epoxy.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49402	(2) 1 oz. Tubes, Resin and Hardener-Carded	12

Permanently bonds rear view mirror bracket to windshield. Strong and fast acting. No Mixing. Two part formula-adhesive and primer. Bond strength to 3000 psi.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49401	.3 ml. Pillow Packet with Primer Carded	12

Multi-purpose lubricant provides extra protection under extreme pressure and temperatures from 0°F to 400°F. Excellent water resistance makes it ideal for machinery operating in damp environments. Also for use on bearings, automotive hinges, hitches, fifth wheels, cables, pulleys and chains.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49611	16 oz. Aerosol Can 11 oz. Net Wt.	12

Dynatex Threadlocker Gel Pump outperforms leading gel and stick products in the marketplace! Stays where it is applied and will not run. Easy cleanup. Just wipe Nozzle with clean rag and close cap.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49456	35ml Pump	6

Formulated to withstand higher operating temperatures. Sensor safe and manufactured to meet OEM specifications. Resist cracking and migration caused by thermal cycling. Will not leak. Temperature resistant up to 650°F (343°C). Resist oil, water, anti-freeze and transmission fluid.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49202	3 oz. (85g) Tube Carded	12
49272	8 oz. (227g) Automatic Can	12
49292	11 oz. (312g) Cartridge	12

General purpose high quality 100% RTV Silicone Sealant. Cures at room temperature to a tough and flexible rubber. For caulking, sealing, waterproofing and bonding. Seals and bonds terminals, connectors, mounting fixtures, mechanical gaskets, glass, metal, masonry, plastic, tile, rubber, wood and fabric. Part numbers 49280, 49281, and 49285 are manufactured to meet USDA approval.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49280	11 oz. (312g) Cartridge Clear	12
49281	11 oz. (312g) Cartridge Aluminium/Grey	12
49285	11 oz. (312g) Cartridge White	12
49297	11 oz. (312g) Cartridge Black	12
49286	11 oz. (312g) Cartridge White (Mildew Resistant)	12

Designed for use in marine applications. Silicone Sealant is used for sealing windshields, doors, windows and wires, around steering cables, depth finder wires, horn assemblies, gauges, marine antenna bases, attaching screws, rail mounts and other locations where hull has been penetrated. Resists shrinkage. Seals and bonds metal, plastic, wood, glass, fiberglass, vinyl and fabric. Cures at room temperature.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49289	11 oz. (312g) Cartridge Clear	12

Seals, protects and insulates. To prevent rust and deaden sound. Undercoat leaves a firm, black, resilient, rubbery texture, which protects against rust and corrosion. Paintable. Quiets road noise. Also for wood fences, post preserver and tree wound dressing. Adheres to any surface.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
52175	20 oz. Aerosol Can 16 oz. Net Wt	12

A dry film lubricant, which waterproofs, protects, reduces corrosion, lubricates and extends life of rubber and plastic parts. Suitable for metal, plastic, rubber, vinyl, leather and wood. Active ingredients comply with FDA and USDA regulations.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
52115	16 oz. Aerosol Can 10.25oz. Net Wt.	12

Designed for low strength threadlocking applications where easy removal is required. On set screws, seals threads to prevent corrosion between the threads. Used to tamper-proof threaded fastener assemblies. Prevents loosening of fasteners when subjected to vibration. Use on 1/4 inch or smaller diameter screws.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49480	ml Bottle	20
49482	24ml Bottle	6
49483	50ml Bottle	10
49484	250ml Bottle	4

Instantly bonds glass, metal, plastics and rubber. Bonds close fitting parts in seconds. Works on aluminum, copper, brass, steel, vinyl, PVC, polyester, nylon, fiberglass and wood. Holding strength to 5000 psi.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49403	3g Bottle Carded	12
49431	20g Bottle w/Applicator Tip	10
49435	2g Tube - Carded	12

Fast and strong repairs. Works on vertical surfaces - will not run. Extra strength formula bonds rubber, vinyl, most plastics, glass, leather, cork and more.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49433	2g Tube Carded	12
49436	20g Tube	10

DYNATEX SUPER SCRUBS Clean paint, adhesive, oil and more from hands, tools and surfaces. PAINT-Oil and Water based. Effective up to 24 hours after application. To assist removal of dry paint, place wipe on spill for a few minutes to soften paint. ADHESIVES AND SEALANTS-Silicone, acrylic, fillers, poly adhesive, poly foam, epoxy, rubber cement and label residue. OIL BASED STAINS-Oil, grease, ink and more. GENERAL CLEANING-Ideal for stain and grease removal from most work surfaces. Will refresh and clean old paint and sealants.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
53105	100 Wipes per tub-8	8

High strength, fast drying, waterproof adhesive for holding gaskets in place and for bonding weatherstripping. Parts can be repositioned while drying. Works well on seat trim, headliner trim and carpeting. Bonds rubber, vinyl, metal, fabrics and glass. Resists oil and most shop and automotive fluids. Holds sanding discs.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49429	Black 5oz (142g) Tube Boxed	12
49430	Yellow 5oz (142g) Tube Boxed	12

All-purpose thread sealant. Seals threaded connections for air, oil, diesel fuel and hydraulic oil. Remains pliable. Temperature ranges -65°F to 300°F. Performs better than tapes. Withstands pressures up to 10,000 psi.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49494	4 oz. Brush Top Bottle	12
49495	16 oz. Brush Top Bottle	6

Specially formulated for use as an assembly lubricant for automatic and manual transmissions. Remains stable and smooth at working temperatures, soluble in transmission fluids and will not clog transmission filters. Apply to bearings, seals, o-rings, gaskets, bushings, sealing rings, thrust washers and hydraulic seals. Blue color eliminates misdiagnosing leaks.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
55016	1lb. Tub	12

A premium state-of-the-art lithium complex grease, this multipurpose lubricant has a high dropping point in excess of 500°F, which ensures retention where high temperatures are encountered. An excellent bearing lubricant for car truck trailers, sports vehicles and plant equipment. Particularly recommended for disc brake equipped vehicles. Excellent water resistor and rust inhibitor. NLGI No. 2

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
54016	1 lb. Can	12

Dynatex® General Purpose Adhesive is a single component medium viscosity cyanoacrylate adhesive. Suitable for general-purpose applications on metals, rubbers and plastics. Also excellent on porous substrates such as foam rubber, cloth and wood.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
42051	1 Oz. Bottle	20

General-purpose lubricant. Protects against rust and corrosion. Minimizes friction. Reduces wear to equipment. Increases service life. Can be used on door, hood and trunk latches. Hinges and compartment springs, seat regulators and tracks, wiper mechanisms, brake parts and distributor cams. Manufactured to meet USDA specifications.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49594	1.5 oz. Tube-Carded	12
49595	16 oz. Tub - NLGI No. 2	12
49596	16 oz. Aerosol Can 10.5 oz. Net Wt.	12
49597	35 lb. Pail (5-Gallon)	1